| Make : FORD | Model : B700 | Year : 1993 |
| Build Dates : 19871101 - 19920901 | ||
| NHTSA Campaign ID Number : 94V118000 | ||
| Date Owners Notified: 19940909 | Date Received by ODI: 19940627 | Date Added to Database: 19940629 |
| Manufacturer(s) Involved: FORD MOTOR COMPANY | ||
| Manufacturer(s) Responsible for the Recall: FORD MOTOR COMPANY | ||
| Manufacturer Campaign Number: | ||
| Component: STEERING:RACK AND PINION | ||
| Potential Number of Units Affected: 12700 | ||
|
Summary of the Safety Concern:
THE STEERING GEARS HAVE AN IMPROPERLY MACHINED SNAP RING GROOVE. THIS CAN CAUSE A FRACTURE OF THE SNAP RING WITH SUBSEQUENT DAMAGE TO THE RECIRCULATING BALL GUIDE TUBE. ALSO, THE O-RING SEAL IN VEHICLES BUILT AFTER FEBRUARY 1988 DOES NOT MEET SPECIFICATIONS AND IS INADEQUATE, CAUSING INTERIOR LEAKAGE AROUND THE O-RING / GLIDE RING SEAL IN THE STEERING GEAR. |
||
|
Consequence:
THE FRACTURE OF THE SNAP RING RESULTS IN INCREASING DETERIORATION OF THE ABILITY TO TURN THE VEHICLE TO THE RIGHT. THE DRIVER WOULD EXPERIENCE INCREASED STEERING EFFORTS OR A "CRUNCHY" FEELING AT THE STEERING WHEEL. THE INADEQUATE O-RING SEAL CAUSES MOMENTARY REDUCTIONS IN POWER STEERING ASSIST AT LOW SPEED AND CERTAIN LEFT TURN MANEUVERS. BOTH CONDITIONS RESULT IN DECREASED STEERING ABILITY. |
||
|
Remedy:
DEALERS WILL REBUILD THE STEERING GEAR. IF A BROKEN SNAP RING IS FOUND DURING REBUILDING, THE STEERING GEAR WILL BE REPLACED WITH A REMANUFACTURED UNIT. |
||
| Report Initiator: ODI | Vehicles Report | |
| Regulation Part Number: | Federal Motor Vehicle Safety Standard Number: | |
|
Notes:
CUSTOMERS CAN ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236). |
||